#include <qwidget.h>
#include <qlabel.h>
#include <qpushbutton.h>
#include <qobject.h>
#include <uiModule/components/fancyButton.h>
#include <qlayout.h>
#include <qspinbox.h>
#include <appCore.hpp>
#include <appConfig/json/generalJsonParsing.hpp>
#include <uiModule/components/enterPasswdWindow.h>
class _952BiaoDingSwitch : public QWidget
{
	Q_OBJECT
public:
	QLabel CurrentModeLabel;
	fancyButtonText NormalBtn, BiaoDingBtn;
	fancyButtonText SaveBtn,RestoreBtn;
	QGridLayout mainLayout;
	QLabel OutOffsetLabel, InnerOffsetLabel;
	QDoubleSpinBox* OutDoubleSpinBox,* InnerDoubleSpinBox, *_3dThresholdSpinBox;
	nlohmann::json JsonObj;
	QLabel _3dSignLabel, _2dSignLabel, _3dThresholdLabel;
	enterPasswdWindow _enterPasswdWindow;//密码窗口
	_952BiaoDingSwitch() 
		: NormalBtn(180, 30, "一般模式", "一般模式")
		, BiaoDingBtn(180, 30, "标定模式", "标定模式")
		, mainLayout(this)
		, SaveBtn(180, 30, "保存&应用", "保存&应用")
		, RestoreBtn(180, 30, "还原", "还原")
	{
		
		QPalette palette;
		palette.setColor(QPalette::WindowText, Qt::white);
		QFont font("微软雅黑", 14, QFont::Bold);
		//
		_3dSignLabel.setText("参数设置");
		_3dSignLabel.setPalette(palette);
		_3dSignLabel.setFont(font);
		mainLayout.addWidget(&_3dSignLabel, 0, 0);
		//
		QHBoxLayout* btnLayout = new QHBoxLayout;
		btnLayout->setContentsMargins(0, 0, 0, 0);
		btnLayout->setAlignment(Qt::AlignLeft);
		btnLayout->addWidget(&NormalBtn);
		btnLayout->addWidget(&BiaoDingBtn);
		mainLayout.addLayout(btnLayout, 1, 0);
		//按钮互斥
		NormalBtn.toGreen();
		QObject::connect(&NormalBtn, &QPushButton::clicked, this, [=]() 
			{
				NormalBtn.toGreen(); 
				BiaoDingBtn.toDefault(); 
				switchToNormal();
			});
		QObject::connect(&BiaoDingBtn, &QPushButton::clicked, this, [=]() 
			{
				BiaoDingBtn.toGreen(); 
				NormalBtn.toDefault(); 
				switchToBiaoDing();
			});
		//
		_2dSignLabel.setText("");
		_2dSignLabel.setPalette(palette);
		_2dSignLabel.setFont(font);
		mainLayout.addWidget(&_2dSignLabel, 2, 0);
		//参数输入
		QHBoxLayout* OutOffsetLayout = new QHBoxLayout;
		OutDoubleSpinBox = new QDoubleSpinBox(this);
		OutDoubleSpinBox->setStyleSheet("QDoubleSpinBox::up-button, QDoubleSpinBox::down-button { width: 0; height: 0; border: none; }");
		OutDoubleSpinBox->setRange(0.0, 100.0);  // 设置最小值和最大值
		OutDoubleSpinBox->setDecimals(2);       // 设置小数点后的位数
		OutDoubleSpinBox->setFont(font);
		//OutDoubleSpinBox->setValue(1.5);        // 设置初始值
		OutOffsetLabel.setText("外侧焊印直径(mm)");
		OutOffsetLabel.setPalette(palette);
		OutOffsetLabel.setFont(font);
		OutOffsetLayout->addWidget(&OutOffsetLabel);
		OutOffsetLayout->addWidget(OutDoubleSpinBox);
		mainLayout.addLayout(OutOffsetLayout, 3, 0);

		QHBoxLayout* InnerOffsetLayout = new QHBoxLayout;
		InnerDoubleSpinBox = new QDoubleSpinBox(this);
		InnerDoubleSpinBox->setStyleSheet("QDoubleSpinBox::up-button, QDoubleSpinBox::down-button { width: 0; height: 0; border: none; }");
		InnerDoubleSpinBox->setRange(0.0, 100.0);  // 设置最小值和最大值
		InnerDoubleSpinBox->setDecimals(2);       // 设置小数点后的位数
		InnerDoubleSpinBox->setFont(font);
		InnerOffsetLabel.setText("内侧焊印直径(mm)");
		InnerOffsetLabel.setPalette(palette);
		InnerOffsetLabel.setFont(font);
		InnerOffsetLayout->addWidget(&InnerOffsetLabel);
		InnerOffsetLayout->addWidget(InnerDoubleSpinBox);
		mainLayout.addLayout(InnerOffsetLayout, 4, 0);

		QHBoxLayout* _3dThresholdLayout = new QHBoxLayout;
		_3dThresholdSpinBox = new QDoubleSpinBox(this);
		_3dThresholdSpinBox->setStyleSheet("QDoubleSpinBox::up-button, QDoubleSpinBox::down-button { width: 0; height: 0; border: none; }");
		_3dThresholdSpinBox->setRange(0.0, 100.0);  // 设置最小值和最大值
		_3dThresholdSpinBox->setDecimals(2);       // 设置小数点后的位数
		_3dThresholdSpinBox->setFont(font);
		_3dThresholdLabel.setText("点胶高度阈值(mm)");
		_3dThresholdLabel.setPalette(palette);
		_3dThresholdLabel.setFont(font);
		_3dThresholdLayout->addWidget(&_3dThresholdLabel);
		_3dThresholdLayout->addWidget(_3dThresholdSpinBox);
		mainLayout.addLayout(_3dThresholdLayout, 5, 0);

		//参数保存
		QHBoxLayout* btnLayout2 = new QHBoxLayout;
		btnLayout2->setContentsMargins(0, 0, 0, 0);
		btnLayout2->setAlignment(Qt::AlignLeft);
		btnLayout2->addWidget(&SaveBtn);
		QObject::connect(&SaveBtn, &QPushButton::clicked, this, [=]()
			{
				_enterPasswdWindow.show();
			});
		QObject::connect(&_enterPasswdWindow, &enterPasswdWindow::okSignal, this, [=]()
			{
				saveConfig();
				// 设置按钮显示√
				SaveBtn.setText("√");
				SaveBtn.toGreen();
				// 创建一个定时器
				QTimer::singleShot(1000, [=]() mutable {
					// 一秒后还原文本
					SaveBtn.toDefault();
					SaveBtn.setText("保存&应用");
					});
			});

		btnLayout2->addWidget(&RestoreBtn);
		QObject::connect(&RestoreBtn, &QPushButton::clicked, this, [=]()
			{
				restore();
			});
		mainLayout.addLayout(btnLayout2, 6, 0);//
		//加载json并设置默认值
		try
		{
			JsonObj = readJsonFromPath("./config/_952BiaoDingSwitchConfig.json");
			int JsonMode = JsonObj["mode"];
			double JsonOutOffset = JsonObj["in_OutOffset"];
			double JsonInnerOffset = JsonObj["in_InnerOffset"];
			double Json3dThreshold = JsonObj["_3d_threshold"];
			if (JsonMode == 1)
				BiaoDingBtn.click();
			OutDoubleSpinBox->setValue(JsonOutOffset);
			InnerDoubleSpinBox->setValue(JsonInnerOffset);
			_3dThresholdSpinBox->setValue(Json3dThreshold);
			QMutexLocker locker(&_core._appConfig.__952BiaoDingSwitchData.mutex);
			_core._appConfig.__952BiaoDingSwitchData.modeIn = JsonMode;
			_core._appConfig.__952BiaoDingSwitchData.in_OutOffset = JsonOutOffset;
			_core._appConfig.__952BiaoDingSwitchData.in_InnerOffset = JsonInnerOffset;
			_core._appConfig.__952BiaoDingSwitchData._3d_threshold = Json3dThreshold;
		}
		catch (...)
		{
			std::cout << "err load json@_952BiaoDingSwitchConfig" << std::endl;
		}
	};
	void switchToBiaoDing()
	{
		QMutexLocker locker(&_core._appConfig.__952BiaoDingSwitchData.mutex);
		_core._appConfig.__952BiaoDingSwitchData.modeIn = 1;
		JsonObj["mode"] = 1;
		saveJsonFromPath("./config/_952BiaoDingSwitchConfig.json", JsonObj);
	}
	void switchToNormal()
	{
		QMutexLocker locker(&_core._appConfig.__952BiaoDingSwitchData.mutex);
		_core._appConfig.__952BiaoDingSwitchData.modeIn = 0;
		JsonObj["mode"] = 0;
		saveJsonFromPath("./config/_952BiaoDingSwitchConfig.json", JsonObj);
	}
	void saveConfig()
	{
		QMutexLocker locker(&_core._appConfig.__952BiaoDingSwitchData.mutex);
		_core._appConfig.__952BiaoDingSwitchData.in_OutOffset = OutDoubleSpinBox->value();
		_core._appConfig.__952BiaoDingSwitchData.in_InnerOffset = InnerDoubleSpinBox->value();
		_core._appConfig.__952BiaoDingSwitchData._3d_threshold = _3dThresholdSpinBox->value();
		JsonObj["in_OutOffset"] = _core._appConfig.__952BiaoDingSwitchData.in_OutOffset;
		JsonObj["in_InnerOffset"] = _core._appConfig.__952BiaoDingSwitchData.in_InnerOffset;
		JsonObj["_3d_threshold"] = _core._appConfig.__952BiaoDingSwitchData._3d_threshold;
		saveJsonFromPath("./config/_952BiaoDingSwitchConfig.json", JsonObj);
		qDebug() << "_952BiaoDingSwitch-ValueChanged:in_OutOffset->" << _core._appConfig.__952BiaoDingSwitchData.in_OutOffset
			<< " | in_InnerOffset->" << _core._appConfig.__952BiaoDingSwitchData.in_InnerOffset;
	}
	void restore()
	{
		QMutexLocker locker(&_core._appConfig.__952BiaoDingSwitchData.mutex);
		OutDoubleSpinBox->setValue(_core._appConfig.__952BiaoDingSwitchData.in_OutOffset);
		InnerDoubleSpinBox->setValue(_core._appConfig.__952BiaoDingSwitchData.in_InnerOffset);
	}
private:
};
#pragma once