handleaiuinew/HanddleAI/HandleAiUi-new/back/algorithmThread.cpp

#include <algorithmThread.h>
#include <ReadBarcode.h>
#include "camera_thread.h"
#include "myiothread.h"
#include "FrontendBackendBridge.h"
#include <myTools.h>

#include <QtConcurrent/QtConcurrent>
#include <future>
#include <iostream>
#include <halconAlgo/Correction.h>
#include <halconAlgo/Inspection.h>
bool showOk = true;//显示ok缺陷的框
std::string fileSavePath("D://CCD//");
//////////////////////
std::vector<cv::Point2f> rotateRect(const cv::Rect& rect, const cv::Point2f& center, double angle) {
	// 构建矩形的四个角点
	std::vector<cv::Point2f> corners(4);
	corners[0] = cv::Point2f(rect.x, rect.y);
	corners[1] = cv::Point2f(rect.x + rect.width, rect.y);
	corners[2] = cv::Point2f(rect.x + rect.width, rect.y + rect.height);
	corners[3] = cv::Point2f(rect.x, rect.y + rect.height);

	// 创建旋转矩阵
	cv::Mat rotationMatrix = cv::getRotationMatrix2D(center, angle, 1.0);

	// 对每个角点应用旋转变换
	std::vector<cv::Point2f> rotatedCorners(4);
	for (int i = 0; i < 4; ++i) {
		cv::Mat pointMat = (cv::Mat_<double>(3, 1) << corners[i].x, corners[i].y, 1);
		cv::Mat rotatedPoint = rotationMatrix * pointMat;
		rotatedCorners[i] = cv::Point2f(rotatedPoint.at<double>(0, 0), rotatedPoint.at<double>(1, 0));
	}

	return rotatedCorners;
}
double calculateAngleWithXAxis(const cv::Point& p1, const cv::Point& p2) {
	// 计算两点的坐标差异
	double dx = p2.x - p1.x;
	double dy = p2.y - p1.y;

	// 使用反正切函数计算角度
	double angle = std::atan2(dy, dx) * 180 / CV_PI;

	// 确保角度在 0 到 360 度之间
	if (angle < 0) {
		angle += 360;
	}

	return angle;
}
void rotateImage(const cv::Mat& src, double angle, cv::Mat& dst) {
	// 图像中心作为旋转中心
	cv::Point2f center(static_cast<float>(src.cols / 2), static_cast<float>(src.rows / 2));

	// 计算旋转矩阵
	cv::Mat rot = cv::getRotationMatrix2D(center, angle, 1.0);

	// 应用旋转
	cv::warpAffine(src, dst, rot, src.size());
}
double calculateDistance(const cv::Point& p1, const cv::Point& p2) {
	// 计算距离
	double distance = std::sqrt(std::pow(p2.x - p1.x, 2) + std::pow(p2.y - p1.y, 2));
	return distance;
}
//std::vector<std::pair<cv::Point, cv::Point>> fitLines(const std::vector<cv::Point>& points, double length) {
//	// 进行多边形拟合
//	std::vector<cv::Point> approxCurve;
//	cv::approxPolyDP(points, approxCurve, length, true);
//
//	std::vector<std::pair<cv::Point, cv::Point>> lines;
//
//	// 从拟合后的多边形中提取直线段
//	for (size_t i = 0; i < approxCurve.size(); ++i) {
//		cv::Point p1 = approxCurve[i];
//		cv::Point p2 = approxCurve[(i + 1) % approxCurve.size()];
//
//		lines.push_back(std::make_pair(p1, p2));
//	}
//
//	return lines;
//}

std::vector<std::pair<cv::Point, cv::Point>> fitLines(const std::vector<cv::Point>& points, double length) {
	// 进行多边形拟合
	std::vector<cv::Point> approxCurve;
	cv::approxPolyDP(points, approxCurve, length, true);

	std::vector<std::pair<cv::Point, cv::Point>> lines;

	// 构建凸包
	std::vector<cv::Point> convexHull;
	cv::convexHull(approxCurve, convexHull);

	// 计算凸包的几何中心
	cv::Point2f center(0, 0);
	for (const auto& point : convexHull) {
		center.x += point.x;
		center.y += point.y;
	}
	center *= (1.0 / convexHull.size());

	// 从拟合后的多边形中提取直线段，并排除方向向内的线段
	for (size_t i = 0; i < approxCurve.size(); ++i) {
		cv::Point p1 = approxCurve[i];
		cv::Point p2 = approxCurve[(i + 1) % approxCurve.size()];

		// 计算线段的中点
		cv::Point midPoint = (p1 + p2) * 0.5;

		// 计算线段中点到多边形几何中心的向量
		cv::Point2f centerToMid = cv::Point2f(midPoint) - center;

		// 计算线段方向向量
		cv::Point2f lineDirection = cv::Point2f(p2) - cv::Point2f(p1);

		// 计算凸包法线
		cv::Point2f normal = cv::Point2f(-centerToMid.y, centerToMid.x);

		// 检查线段方向是否朝向凸包内部（与凸包法线方向相反）
		if (lineDirection.dot(normal) < 0) {
			lines.push_back(std::make_pair(p1, p2));
		}
	}

	return lines;
}
void writeToData_xxxCsvOkNgNew(detData* rdata, QString OKNG, ngNoteCls* note)
{
	QDateTime currentDateTime = QDateTime::currentDateTime();
	std::string ymd = currentDateTime.toString("yyyy-MM-dd").toStdString();
	QString filePath = QString::fromStdString(fileSavePath + "//result//" + ymd + "//Data_" + ymd + ".csv");
	/* QString searchString = QString::fromStdString(rdata->getSN() + "_" + to_string(rdata->snCountIndex));*/
	QString searchString = QString::fromStdString(rdata->SNcode);
	QFile file(filePath);
	if (!file.open(QIODevice::ReadOnly | QIODevice::Text)) {
		qDebug() << "Error opening file.";
	}

	QStringList headers;
	QList<QStringList> data;

	QTextStream in(&file);
	while (!in.atEnd()) {
		QString line = in.readLine();
		QStringList fields = line.split(',');

		if (headers.isEmpty()) {
			// 如果headers为空，则当前行为标题行
			headers = fields;
		}
		else {
			data.append(fields);
		}
	}

	file.close();

	// 在data中进行字符串检索并修改匹配的行
	int modifiedRowCount = 0;
	for (int i = data.size() - 1; i > 0; --i) {
		QStringList& row = data[i];
		//if (row.size()<3||row.isEmpty())
		//{
		//	break;
		//}
		// 在当前行中检索字符串
		try
		{
			if (row.size() >= 6)
				if (row[1].contains(searchString, Qt::CaseInsensitive)) {
					// 匹配到字符串，进行修改
					row[3] = OKNG;
					row[4] += note->getNgSummaryStr();
					row[5] += note->getOkSummaryStr();
					modifiedRowCount++;
				}
		}
		catch (...)
		{
			break;
		}
	}

	// 将修改后的数据写回文件
	QFile writeFile(filePath);
	if (!writeFile.open(QIODevice::WriteOnly | QIODevice::Text)) {
		qDebug() << "Error opening file for writing.";
	}

	QTextStream out(&writeFile);
	// 写入标题行
	out << headers.join(",") << "\n";

	// 写入修改后的数据行
	for (const auto& row : data) {
		out << row.join(",") << "\n";
	}

	writeFile.close();

	qDebug() << "Modified rows:" << modifiedRowCount;
	qDebug() << "Data modified and saved to data_modified.csv";

	//return 0;
}
void writeToData_xxxCSVNew(detData* resData, string OKNG, ngNoteCls* note)
{
	QDateTime currentDateTime = QDateTime::currentDateTime();
	std::string ymd = currentDateTime.toString("yyyy-MM-dd").toStdString();
	int hour = currentDateTime.time().hour();

	QString filePath = QString::fromStdString(fileSavePath + "//result//" + ymd + "//Data_" + ymd + ".csv");
	//string sn(resData->SNcode + "-" + to_string(resData->snCountIndex));
	string sn(resData->SNcode);
	/*std::string str(to_string(hour) + "H//" + sn + "-" + to_string(resData->snCountIndex) + "//" + ymd
		+ "-" + to_string(hour) + "_" + resData->getSN() + "-" + to_string(resData->snCountIndex));*/
	std::string str(to_string(hour) + "H//" + sn + "//" + ymd
		+ "-" + to_string(hour) + "_" + sn);
	bool fileExist = false;
	QStringList dataList;
	if (hour < 10)
		dataList.append("0" + QString::number(hour) + "H");
	else
		dataList.append(QString::number(hour) + "H");
	dataList.append(QString::fromStdString(sn));
	dataList.append(QString::fromStdString(str));
	dataList.append(QString::fromStdString(OKNG));
	dataList.append(note->getNgSummaryStr());
	dataList.append(note->getOkSummaryStr());
	// 创建CSV文件
	QFile file(filePath);
	if (!file.exists())
	{
		// 创建目录（如果不存在）
		QDir dir;
		if (!dir.mkpath(QFileInfo(filePath).absolutePath()))
		{
			//qWarning() << "无法创建目录：" << QFileInfo(filePath).absolutePath();
			return;
		}
		fileExist = true;
	}
	// 打开CSV文件并写入数据
	if (file.open(QIODevice::WriteOnly | QIODevice::Append | QIODevice::Text)) {
		QTextStream stream(&file);
		if (fileExist == true)
		{
			stream << "Time,";
			stream << "SN,";
			stream << "Path,";
			stream << "Result,";
			stream << "summuryResult,";
			stream << "\n";
		}
		// 将数据写入CSV文件
		for (const QString& data : dataList) {
			stream << data << ",";
		}
		stream << "\n";

		file.close();
		qDebug() << "CSV文件写入成功";
	}
	//else 
	//    qWarning() << "无法打开CSV文件：" << filePath;

}
void algoThread::getAllFiles(string path, vector<string>& files, string format)
{
	intptr_t  hFile = 0;//恅璃曆梟 	
	struct _finddata_t fileinfo;//恅璃陓洘 	
	string p;
	if ((hFile = _findfirst(p.assign(path).append("\\*" + format).c_str(), &fileinfo)) != -1) //恅璃湔婓	
	{
		do
		{
			if ((fileinfo.attrib & _A_SUBDIR))//瓚剿岆瘁峈恅璃標			
			{
				if (strcmp(fileinfo.name, ".") != 0 && strcmp(fileinfo.name, "..") != 0)//恅璃標靡笢祥漪"."睿".."				
				{
					files.push_back(p.assign(path).append("\\").append(fileinfo.name)); //悵湔恅璃標靡					
					getAllFiles(p.assign(path).append("\\").append(fileinfo.name), files, format); //菰寥梢盪恅璃標				
				}
			}
			else
			{
				files.push_back(p.assign(path).append("\\").append(fileinfo.name));//彆祥岆恅璃標ㄛ揣湔恅璃靡			
			}
		} while (_findnext(hFile, &fileinfo) == 0);
		_findclose(hFile);
	}
}

inline string getFileName(string path)
{
	return path.substr(path.find_last_of("\\") + 1, path.find_last_of(".") - path.find_last_of("\\") - 1);
}
void drawContoursOverlap(cv::Mat& image, const std::vector<std::vector<cv::Point>>& contours) {
	cv::Mat mask = cv::Mat::zeros(image.size(), CV_8U);

	// 绘制轮廓在掩码上
	cv::drawContours(mask, contours, -1, cv::Scalar(255), cv::FILLED);

	// 将图像中与掩码不重叠的区域涂黑
	cv::Mat result;
	image.copyTo(result, mask);
	image.setTo(cv::Scalar(0, 0, 0), ~mask);
}
void drawContourOnImage(Mat seg, cv::Mat& imgInput, Size offset = Size(0, 0)) {
	if (seg.empty() || imgInput.empty()) {
		std::cerr << "Empty contour or input image." << std::endl;
		return;
	}
	cv::Mat imgWithAlpha;
	cv::cvtColor(imgInput, imgWithAlpha, cv::COLOR_BGR2BGRA);
	std::vector<std::vector<cv::Point>>contours;
	if (offset.width != 0 && offset.height != 0)
	{
		Mat offsetImg(offset.width + seg.rows, offset.height + seg.cols, CV_8UC1, Scalar(0));
		seg.copyTo(offsetImg(Rect(offset.width, offset.height, seg.rows, seg.cols)));
		offsetImg.copyTo(seg);
	}
	cv::findContours(seg, contours, cv::noArray(), cv::RETR_EXTERNAL, cv::CHAIN_APPROX_NONE);
	for (auto& contour : contours)
	{
		cv::Scalar color(0, 255, 0, 128);
		cv::polylines(imgWithAlpha, contour, true, color);
		cv::cvtColor(imgWithAlpha, imgInput, cv::COLOR_BGRA2BGR);
	}
}
/////Specified function////////////////
void writeSpecificStatement(Mat& Paint, const wchar_t* Text, rectAndData& data, int amount, int limit, Scalar& color)
{
	wstring MM(to_wstring(max(data.defectHeight, data.defectWidth)));
	MM = MM.substr(0, MM.find_first_of(L".") + 2);
	putTextHusky(Paint, (WString2String(Text + to_wstring(amount)
		+ L"/" + to_wstring(limit) + L"|" +
		MM + L"mm")).c_str(),
		cv::Point(data.rect.x, data.rect.y - 20), color, 20);
}
int getMaxAreaIndex(std::vector<std::vector<cv::Point>>& pts)
{
	int maxVal = 0, maxI = -1;
	for (int i =0;i<pts.size();i++)
	{
		int areaSize = cv::contourArea(pts[i]);
		if (areaSize > maxVal)
		{
			maxI = i;
			maxVal = areaSize;
		}	
	}
	return maxI;
}
std::vector < std::vector<std::pair<cv::Point, cv::Point>>> splitLinesByCenterAndAngle(const std::vector<std::pair<cv::Point, cv::Point>>& lines, const cv::Point& center) {
	std::vector<std::pair<cv::Point, cv::Point>> topLines, bottomLines, leftLines, rightLines;

	for (const auto& line : lines) {
		const cv::Point& p1 = line.first;
		const cv::Point& p2 = line.second;

		// 计算线段的方向向量
		cv::Point2f lineDirection = cv::Point2f(p2) - cv::Point2f(p1);

		// 计算线段与 x 轴和 y 轴的夹角
		double angleWithX = std::atan2(lineDirection.y, lineDirection.x) * 180 / CV_PI;
		double angleWithY = std::atan2(lineDirection.x, lineDirection.y) * 180 / CV_PI;
		angleWithX = (angleWithX < 0) ? 180 + angleWithX : angleWithX;
		angleWithY = (angleWithY < 0) ? 180 + angleWithY : angleWithY;
		// 根据线段方向和中心点位置将线段分组
		if (p1.y <= center.y && p2.y <= center.y && (angleWithX < 10 || angleWithX > 170)) {
			std::cout << "A" << to_string(angleWithX) << "A" << to_string(angleWithY) << std::endl;
			topLines.push_back(line);
		}
		else if (p1.y >= center.y && p2.y >= center.y && (angleWithX < 10 || angleWithX > 170)) {
			bottomLines.push_back(line);
		}

		else if (p1.x <= center.x && p2.x <= center.x && (angleWithY < 10 || angleWithY > 170)) {
			leftLines.push_back(line);
		}
		else if (p1.x >= center.x && p2.x >= center.x && (angleWithY < 10 || angleWithY > 170)) {
			rightLines.push_back(line);
		}
	}

	// 返回四个方向的线段结果
	return { topLines, bottomLines, leftLines, rightLines };
}

std::vector<std::pair<cv::Point, cv::Point>> filterLinesByAngle(const std::vector<std::pair<cv::Point, cv::Point>>& lines) {
	std::vector<std::pair<cv::Point, cv::Point>> filteredLines;

	for (const auto& line : lines) {
		const cv::Point& p1 = line.first;
		const cv::Point& p2 = line.second;

		// 计算线段的方向向量
		cv::Point2f lineDirection = cv::Point2f(p2) - cv::Point2f(p1);

		// 计算线段与 x 轴和 y 轴的夹角
		double angleWithX = std::abs(std::atan2(lineDirection.y, lineDirection.x) * 180 / CV_PI);
		double angleWithY = std::abs(std::atan2(lineDirection.x, lineDirection.y) * 180 / CV_PI);

		// 如果与 x 轴或 y 轴的夹角在正负30度内，则保留该线段
		if ((angleWithX < 10 || angleWithX > 170) || (angleWithY < 10 || angleWithY > 170)) {
			filteredLines.push_back(line);
		}
	}

	return filteredLines;
}

double pointLineSegmentDistance(const cv::Point& p, const cv::Point& q, const cv::Point& a, const cv::Point& b) {
	cv::Point pq = q - p;
	cv::Point ab = b - a;
	cv::Point pa = a - p;

	double t = static_cast<double>(pq.dot(ab)) / pq.dot(pq);

	if (t >= 0 && t <= 1) {
		cv::Point pt = p + pq * t;
		return cv::norm(pt - a);
	}
	else {
		double dist1 = cv::norm(p - a);
		double dist2 = cv::norm(q - b);
		return std::min(dist1, dist2);
	}
}

double calculateLineSegmentDistance(const std::pair<cv::Point, cv::Point>& line1, const std::pair<cv::Point, cv::Point>& line2) {
	cv::Point p1 = line1.first;
	cv::Point p2 = line1.second;
	cv::Point p3 = line2.first;
	cv::Point p4 = line2.second;

	double distance1 = pointLineSegmentDistance(p1, p2, p3, p4);
	double distance2 = pointLineSegmentDistance(p2, p1, p3, p4);
	double distance3 = pointLineSegmentDistance(p3, p4, p1, p2);
	double distance4 = pointLineSegmentDistance(p4, p3, p1, p2);

	//return std::min({distance1, distance2, distance3, distance4 });
	return (distance1 + distance2 + distance3 + distance4) / 4;
}

void calculateLineSegmentDistances(const std::vector<std::pair<cv::Point, cv::Point>>& lines1, const std::vector<std::pair<cv::Point, cv::Point>>& lines2) {
	double minDistance = std::numeric_limits<double>::max();
	double maxDistance = std::numeric_limits<double>::min();
	double sumDistance = 0.0;

	size_t count = 0;
	for (const auto& line1 : lines1) {
		for (const auto& line2 : lines2) {
			double distance = calculateLineSegmentDistance(line1, line2);
			if (distance >= 0) {
				sumDistance += distance;
				std::cout << "Minimum distansssdce: " << distance * 0.014744 << std::endl;
				if (distance < minDistance) {
					minDistance = distance;
				}

				if (distance > maxDistance) {
					maxDistance = distance;
				}

				++count;
			}
		}
	}

	std::cout << "Minimum distance: " << minDistance* 0.014744 << std::endl;
	std::cout << "Maximum distance: " << maxDistance* 0.014744 << std::endl;
	std::cout << "Average distance: " << (sumDistance / count)* 0.014744 << std::endl;
}


/////////////////////ALGOTHREAD/////////////////////////
bool algoThread::addDetTask(detData* data)
{
	detQueueMutex.lock();
	detQueue.append(data);
	detQueueMutex.unlock();
	this->start();
	return false;
}
bool algoThread::waitForImg(detData* data,int timeOutSet=10000)
{
	int timeOut = 0;
	int sleepMs = 100;
	while (1)
	{
		int imgSize = data->imgs.size();
		int imgAmountMin = data->imgAmountMin;
		if (imgSize >= imgAmountMin)
			return true;
		timeOut+= sleepMs;
		if (timeOut > timeOutSet)
			return false;
		QThread::msleep(sleepMs);
	}
}
void algoThread::run()
{
	while (m_runFlag == true)
	{
		while (detQueue.size() > 0)
		{

			detQueueMutex.lock();
			detData* data = detQueue.dequeue();//取出数据
			detQueueMutex.unlock();
			int threadId = data->algoThreadIndex;//获取线程id	

			if (threadId == 0)
			{
				int timeOut = 0;
				int sleepMs = 100;
				while (data->correctionData==nullptr)
				{	
					if (timeOut > 10000)break;
					timeOut += sleepMs;
					QThread::msleep(sleepMs);
				}
				ALGO_Correction(data);
			}
			else
			{

				if (waitForImg(data) == false)
				{
					qDebug() << "取图失败";
					cout << "get img err" << endl;
					break;
				}
				bridge.front.showImg("Camera", data->imgs[0], threadId);//显示原图

				auto start = std::chrono::high_resolution_clock::now();
				switch (threadId)
				{
				case 0:
					Camera1_Algo(data);
					break;
				case 1:
					Camera1_Algo(data);
					break;
				}
				oriSaveThread->saveOriImg(data);//保存原图

				auto end = std::chrono::high_resolution_clock::now();
				auto duration = std::chrono::duration_cast<std::chrono::milliseconds>(end - start);
				std::cout << "Time taken by function: " << duration.count() << " milliseconds" << std::endl;

				//if (!data->SNcode.compare(snDatas->snErrorsnError))//无sn阻塞
				//	data->SNcode = snDatas->waitForSn(data->timeCode);		
				if (data->resultImgs.size() > 0)
				{
					resSaveThread->saveResImg(data);//保存结果图
					bridge.front.showImg("Algorithm", data->resultImgs[0], threadId);//显示原图
					//cout << "algoEnd" << data->algoThreadIndex;
				}

				std::vector<sqlData> sqlDatas;//定义sql数据
				for (auto sqlData : data->sqlVec)//将算法中的数据导入到数据结构中
					sqlDatas.push_back({ sqlData.first, std::to_string(sqlData.second) });
				sql->addData(data->SNcode, sqlDatas);//将数据插入数据库

				std::vector<QString>strVec({ QString::fromStdString(data->SNcode),QString::number(data->camera1Width) + "x" + QString::number(data->camera1Height) });
				bridge.front.tableViewPtr->addRowDataValue(strVec);//将数据插入界面表格

				detDataController* dController = data->dController;
				data->dController->deleteDetData(data->timeCode);
			}
		}
		QThread::msleep(10);
	}
}
void matsToMat(cv::Mat& mat1, cv::Mat& mat2, cv::Mat* Paint)
{
	auto start_time = std::chrono::high_resolution_clock::now();
	*Paint = cv::Mat(mat1.rows + mat2.rows, mat1.cols, CV_8UC1);
	memcpy(Paint->data, mat1.data, mat1.rows * mat1.cols);
	memcpy(mat1.rows * mat1.cols + Paint->data, mat2.data, mat2.rows * mat2.cols);
	if (Paint->channels() == 1)
		cv::cvtColor(*Paint, *Paint, cv::COLOR_GRAY2BGR);
	auto end_time = std::chrono::high_resolution_clock::now();
	auto duration = std::chrono::duration_cast<std::chrono::milliseconds>(end_time - start_time);
	std::cout << "matsToMat: " << duration.count() << " microseconds" << std::endl;
}
void algoThread::ALGO_Correction(detData* data)
{
	ALGO_Inspection(data);
	int pValueBounus = 100;
	if (data->correctionData == nullptr)
		return;
#pragma region XOY_DEFINE
	HTuple hv_in_X_X0Y;
	for (auto rangeData : data->correctionData->in_X_X0Y)
		hv_in_X_X0Y.Append(rangeData);

	HTuple hv_in_Y_X0Y;
	for (auto rangeData : data->correctionData->in_Y_X0Y)
		hv_in_Y_X0Y.Append(rangeData);

	HTuple hv_in_Z_X0Y;
	for (auto rangeData : data->correctionData->in_Z_X0Y)
		hv_in_Z_X0Y.Append(rangeData);

	HTuple hv_in_Z_X0Y_Value;
	for (auto rangeData : data->correctionData->in_Z_X0Y_Value)
		hv_in_Z_X0Y_Value.Append(rangeData);
#pragma endregion

#pragma region XOZ_DEFINE
	HTuple hv_in_X_X0Z;
	for (auto rangeData : data->correctionData->in_X_X0Z)
		hv_in_X_X0Z.Append(rangeData);

	HTuple hv_in_Y_X0Z;
	for (auto rangeData : data->correctionData->in_Y_X0Z)
		hv_in_Y_X0Z.Append(rangeData);

	HTuple hv_in_Z_X0Z;
	for (auto rangeData : data->correctionData->in_Z_X0Z)
		hv_in_Z_X0Z.Append(rangeData);

	HTuple hv_in_Y_X0Z_Value;
	for (auto rangeData : data->correctionData->in_Y_X0Z_Value)
		hv_in_Y_X0Z_Value.Append(rangeData);
#pragma endregion

#pragma region YOZ_DEFINE
	HTuple hv_in_X_Y0Z;
	for (auto rangeData : data->correctionData->in_X_Y0Z)
		hv_in_X_Y0Z.Append(rangeData);

	HTuple hv_in_Y_Y0Z;
	for (auto rangeData : data->correctionData->in_Y_Y0Z)
		hv_in_Y_Y0Z.Append(rangeData);

	HTuple hv_in_Z_Y0Z;
	for (auto rangeData : data->correctionData->in_Z_Y0Z)
		hv_in_Z_Y0Z.Append(rangeData);

	HTuple hv_in_X_Y0Z_Value;
	for (auto rangeData : data->correctionData->in_X_Y0Z_Value)
		hv_in_X_Y0Z_Value.Append(rangeData);
#pragma endregion

	HTuple hv_out_Origin;
	HTuple hv_out_Result_X;
	HTuple hv_out_Result_Y;
	HTuple hv_out_Result_Z;
	HTuple hv_out_AngleZX;
	HTuple hv_out_AngleYZ;
	HTuple hv_out_AngleXY;
	HTuple hv_out_Flag;
	halcon_Correction(
		hv_in_X_X0Y,  hv_in_Y_X0Y,  hv_in_Z_X0Y,  hv_in_Z_X0Y_Value,
		hv_in_X_X0Z,  hv_in_Y_X0Z,  hv_in_Z_X0Z,  hv_in_Y_X0Z_Value,
		hv_in_X_Y0Z,  hv_in_Y_Y0Z,  hv_in_Z_Y0Z,  hv_in_X_Y0Z_Value,
		&hv_out_Origin,&hv_out_Result_X,&hv_out_Result_Y,&hv_out_Result_Z,
		&hv_out_AngleZX,&hv_out_AngleYZ,&hv_out_AngleXY,&hv_out_Flag);

	int ok_Flag = 0;
	vector<double>out_Origin;
	vector<double>out_Result_X;
	vector<double>out_Result_Y;
	vector<double>out_Result_Z;
	double out_AngleZX;
	double out_AngleYZ;
	double out_AngleXY;

	if(hv_out_Flag.Length()==1)
		if (hv_out_Flag[0].D()== 1)
		{
			if (hv_out_Origin.Length() == 3)
			{
				out_Origin = { hv_out_Origin[0].D(),hv_out_Origin[1].D(), hv_out_Origin[2].D() };
				ok_Flag++;
			}
			if (hv_out_Result_X.Length() == 3)
			{
				out_Result_X = { hv_out_Result_X[0].D(),hv_out_Result_X[1].D(), hv_out_Result_X[2].D() };
				ok_Flag++;
			}
			if (hv_out_Result_Y.Length() == 3)
			{
				out_Result_Y = { hv_out_Result_Y[0].D(),hv_out_Result_Y[1].D(), hv_out_Result_Y[2].D() };
				ok_Flag++;
			}
			if (hv_out_Result_Z.Length() == 3)
			{
				out_Result_Z = { hv_out_Result_Z[0].D(),hv_out_Result_Z[1].D(), hv_out_Result_Z[2].D() };
				ok_Flag++;
			}
			if (hv_out_AngleZX.Length() == 1)
			{
				out_AngleZX = hv_out_AngleZX[0].D();
				ok_Flag++;
			}
			if (hv_out_AngleYZ.Length() == 1)
			{
				out_AngleYZ = hv_out_AngleYZ[0].D();
				ok_Flag++;
			}
			if (hv_out_AngleXY.Length() == 1)
			{
				out_AngleXY = hv_out_AngleXY[0].D();
				ok_Flag++;
			}
		}
		else
		{
			std::cout << "error";
		}

	if (ok_Flag != 7)
	{
		//qDebug()
		return;
	}
	//originX
	bridge.back.sendFinsMsg("write_short_310_" + QString::number(out_Origin[0] < 0 ? 2 : 1));
	bridge.back.sendFinsMsg("write_short_311_" + QString::number(abs(static_cast<int>(out_Origin[0]))));
	double pvalue = out_Origin[0] - static_cast<int>(out_Origin[0]);
	bridge.back.sendFinsMsg("write_short_312_" + QString::number(abs(pvalue* pValueBounus)));

	//originY
	bridge.back.sendFinsMsg("write_short_313_" + QString::number(out_Origin[1] < 0 ? 2 : 1));
	bridge.back.sendFinsMsg("write_short_314_" + QString::number(abs(static_cast<int>(out_Origin[1]))));
	pvalue = out_Origin[1] - static_cast<int>(out_Origin[1]);
	bridge.back.sendFinsMsg("write_short_315_" + QString::number(abs(pvalue * pValueBounus)));

	//originZ
	bridge.back.sendFinsMsg("write_short_316_" + QString::number(out_Origin[2] < 0 ? 2 : 1));
	bridge.back.sendFinsMsg("write_short_317_" + QString::number(abs(static_cast<int>(out_Origin[2]))));
	pvalue = out_Origin[2] - static_cast<int>(out_Origin[2]);
	bridge.back.sendFinsMsg("write_short_318_" + QString::number(abs(pvalue * pValueBounus)));

	//ResultX1
	bridge.back.sendFinsMsg("write_short_319_" + QString::number(out_Result_X[0] < 0 ? 2 : 1));
	bridge.back.sendFinsMsg("write_short_320_" + QString::number(abs(static_cast<int>(out_Result_X[0]))));
	pvalue = out_Result_X[0] - static_cast<int>(out_Result_X[0]);
	bridge.back.sendFinsMsg("write_short_321_" + QString::number(abs(pvalue * pValueBounus)));

	//ResultX2
	bridge.back.sendFinsMsg("write_short_322_" + QString::number(out_Result_X[1] < 0 ? 2 : 1));
	bridge.back.sendFinsMsg("write_short_323_" + QString::number(abs(static_cast<int>(out_Result_X[1]))));
	pvalue = out_Result_X[1] - static_cast<int>(out_Result_X[1]);
	bridge.back.sendFinsMsg("write_short_324_" + QString::number(abs(pvalue * pValueBounus)));

	//ResultX3
	bridge.back.sendFinsMsg("write_short_325_" + QString::number(out_Result_X[2] < 0 ? 2 : 1));
	bridge.back.sendFinsMsg("write_short_326_" + QString::number(abs(static_cast<int>(out_Result_X[2]))));
	pvalue = out_Result_X[2] - static_cast<int>(out_Result_X[2]);
	bridge.back.sendFinsMsg("write_short_327_" + QString::number(abs(pvalue * pValueBounus)));

	//ResultY1
	bridge.back.sendFinsMsg("write_short_328_" + QString::number(out_Result_Y[0] < 0 ? 2 : 1));
	bridge.back.sendFinsMsg("write_short_329_" + QString::number(abs(static_cast<int>(out_Result_Y[0]))));
	pvalue = out_Result_Y[0] - static_cast<int>(out_Result_Y[0]);
	bridge.back.sendFinsMsg("write_short_330_" + QString::number(abs(pvalue * pValueBounus)));

	//ResultY2
	bridge.back.sendFinsMsg("write_short_331_" + QString::number(out_Result_Y[1] < 0 ? 2 : 1));
	bridge.back.sendFinsMsg("write_short_332_" + QString::number(abs(static_cast<int>(out_Result_Y[1]))));
	pvalue = out_Result_Y[1] - static_cast<int>(out_Result_Y[1]);
	bridge.back.sendFinsMsg("write_short_333_" + QString::number(abs(pvalue * pValueBounus)));

	//ResultY3
	bridge.back.sendFinsMsg("write_short_334_" + QString::number(out_Result_Y[2] < 0 ? 2 : 1));
	bridge.back.sendFinsMsg("write_short_335_" + QString::number(abs(static_cast<int>(out_Result_Y[2]))));
	pvalue = out_Result_Y[2] - static_cast<int>(out_Result_Y[2]);
	bridge.back.sendFinsMsg("write_short_336_" + QString::number(abs(pvalue * pValueBounus)));
}
void algoThread::ALGO_Inspection(detData* data)
{
	if (data->imgs.size() < 1)
	{
		qDebug() << __FUNCDNAME__ << __LINE__ << "camera Mat size is Error!";
		return;
	}
	//hv_in_Parameter
	//[0]-产品种类; 1A正面 2A反面 3B正面 4C正面
	//[1]-图像序号第一位;
	//[2]-图像序号第二位;
	//[3]-3d相机精度（mm）;
	//[4]-ping针偏移判NG阈值（mm）;
	//[5]-切图存图开关
#pragma region halcon变量定义
	//测量
	HObject ho_in_Image;
	HTuple hv_in_ShapePath;
	HTuple hv_in_Parameter;
	HTuple hv_out_Pings_X;
	HTuple hv_out_Pings_Y;
	HTuple hv_out_NG_Pings_X;
	HTuple hv_out_NG_Pings_Y;
	HTuple hv_out_Pings_Num;
	HTuple hv_out_NG_Pings_Num;
	HTuple hv_out_Flag_INS;

	//ROI
	HTuple hv_out_ROI_Value;
	HTuple hv_out_Flag_ROI;
#pragma endregion

	cv::Mat mat = cv::imread("C://NHMJDHNN78474-5_1-ASR1006X20240320-150822.BMP", -1);
	ho_in_Image=simpleAlgo::MatToHObject(mat);

	hv_in_Parameter.Append(3);
	hv_in_Parameter.Append(5);
	hv_in_Parameter.Append(1);
	hv_in_Parameter.Append(0.0135);
	hv_in_Parameter.Append(0.2);
	hv_in_Parameter.Append(2);

	hv_in_ShapePath = "./halconModel";

	
	Pings_Inspection(ho_in_Image, hv_in_ShapePath, hv_in_Parameter, &hv_out_Pings_X,
		&hv_out_Pings_Y, &hv_out_NG_Pings_X, &hv_out_NG_Pings_Y, &hv_out_Pings_Num,
		&hv_out_NG_Pings_Num, &hv_out_Flag_INS);

	Pings_ROI(ho_in_Image, hv_in_ShapePath, hv_in_Parameter, &hv_out_ROI_Value, &hv_out_Flag_ROI);
	vector<Rect>Result;
	for (int i = 0; i < hv_out_ROI_Value.Length()/4;i++)
	{
		Result.push_back(
			cv::Rect(
				hv_out_ROI_Value[i * 4 +1].D(),
				hv_out_ROI_Value[i * 4].D(),
				hv_out_ROI_Value[i * 4 +3].D() - hv_out_ROI_Value[i * 4 + 1].D(),
				hv_out_ROI_Value[i * 4 +2].D() - hv_out_ROI_Value[i * 4].D()
				));
	}
	cv::Mat Paint;
	cvtColor(mat, Paint, COLOR_GRAY2BGR);	
	rectangle(Paint, Result[0], cv::Scalar(0, 0, 255), 4);
	_sleep(100);
}
void algoThread::Camera1_Algo(detData* data)
{
	auto start_time = std::chrono::high_resolution_clock::now();
	if (data->imgs.size() < 1)
	{
		qDebug() << __FUNCDNAME__ << __LINE__ << "camera Mat size is Error!";
		return;
	}
	///////////////////取图///声明/////////////////////   
	ngNoteCls Note;
	cv::Mat src;
	cv::Mat Paint;
	int CCD1OK = 1;
	double CCD1height = -1;
	double dmCodeWidth = 0, dmCodeHeight = 0;
	double pixAccX = 0.013502052, pixAccY = 0.014005423575;
	double camera1Width = 1, camera1Height = 2;
	QFuture<void> future1; 
	if (data->imgs.size() == 1)
	{
		src = data->imgs[0];
		if (Paint.channels() == 1)
			cv::cvtColor(src, Paint, cv::COLOR_GRAY2BGR);
		else
			src.copyTo(Paint);
	}
	

	//}
	if (CCD1OK == 2)
		cv::putText(Paint, "NG", cv::Point(150, 600), 1, 10, cv::Scalar(0, 0, 255), 30);
	else
		cv::putText(Paint, "OK", cv::Point(150, 600), 1, 10, cv::Scalar(0, 255, 0), 30);
	
	///////////////////无SN阻塞///////////////////////
	//if (!data->SNcode.compare(snDatas->snErrorsnError))
	//	data->SNcode = snDatas->waitForSn(data->timeCode);
	cv::putText(Paint, data->SNcode, cv::Point(150, 800), 1, 10, cv::Scalar(0, 255, 0), 10);
	/////////////////////SQL////////////////////////
	data->sqlVec.push_back({ "Camera1Result", CCD1OK });
	data->sqlVec.push_back({ "Camera1_Width", camera1Width });
	data->sqlVec.push_back({ "Camera1_Height", camera1Height });
	////////////////////结果保存//////////////////
	cv::resize(Paint, Paint, cv::Size(Paint.cols / 2, Paint.rows / 2));
	data->resultImgs.push_back(Paint);
	//////////////CSV/////////////////////////////
	string OKNG("OK");
	if (CCD1OK == 2)OKNG = "NG";
	qDebug() << "[Debug]algo1 end:" << QString::fromStdString(data->SNcode);
	std::cout << "algo1 end:" << QString::fromStdString(data->SNcode).toStdString() << endl;
}